Basic Info.
Warranty
2 Years Free Spare Parts
Assembly Structure
Integral Type Extruder
Computerized
Computerized
Product Description
MBBR Bioreactive film filler production line extruder
Brief Introduction:
This Line is used to produce all types of PVC window/door profiles with changing the molds, like sliding frame, sliding frame case, fixing frame, fixing frame case, sliding leaf, sliding leaf frame, sliding gauze, sliding seal, single glas bead, double glass bead, sliding lid, door frame, etc.
All the electrical components are top quality.
The Line has the feature of low waster of energy, good performance, high speed and high efficiency, atc. The finished profiles produced by this machine has the feature of good surface, stronger compression resistance, light and heat stability, low size-changing and ageing resistance.
Main Technical Parameter:
Model | Width(mm) | Extruder Model | Output(kg/h) | Motor(kw) |
WS108 | 108 | SJZ51/105 | 80-120 | 18.5 |
WS180 | 180 | SJZ51/105 or SJZ55/110 | 80-120/120-150 | 18.5/22 |
WS240 | 240 | SJZ65/132 | 175-250 | 37 |
WS300 | 300 | SJZ65/132 | 175-250 | 37 |
WS400 | 400 | SJZ65/132 or SJZ80/156 | 175-250/250-350 | 37/55 |
WS600 | 600 | SJZ65/132 or SJZ80/156 | 175-250/250-350 | 37/55 |
WS800 | 800 | SJZ80/156 | 280-350 | 55 |
WS1220 | 1220 | SJZ80/156 or SJZ92/188 | 300-350/600-700 | 75/110 |
Single screw extruder HDPE plastic extruder for MBBR making.
The single screw extruder HDPE plastic extruder for MBBR making is developed for high output of twin-pipe/four pipes extrusion. The main machine is SJSZ51/105 or SJSZ65/132 conical double-screw extruder, is equipped with double-tube single-control stainless steel spraying shaper to form a production line. It avoids a waste condition when one tube is adjusted and the other one is affected. The auto single-control double drawing machine and cutting are combined with the front shaping technology to make operation more flexible. Let you enjoy economic benefit which is brought about by separately control double-tube extruding. The diameter of the extruded pipe is from Φ16-Φ63(mm). It can fully use the extruding capacity of the extruder.
Product Description
1.easy to operate
2.different sizes according to pipe's diameter
3.advanced technology
4.12-800mm pipe vacuum foaming tank are mainly used in the manufacture of plastic pvc pipes with various diameters and wall thickness used in the fields such as agricultural and constructional plumbing ,cable lay etc.
5.This pvc pipe vacuum foaming tank is composed of conical twin-screw extruder,vacuum calibration tank,haul-off ,cutter and stake etc.
claws Haul-off
two -claw Haul off Machine
Double/Belt Tractor, mainly matched with plastic extruder, used for traction of various materials such as plastic PVC/PE/PPR pipes, engineering materials PEEK/PA/PC Bars, Profiles, Hoses, etc., With a wide range of applications,Easy to use.
Three claws, four claws, and six claws, using multiple crawlers to pull at the same time, SCR stepless speed regulation or frequency conversion speed regulation, mainly used in conjunction with plastic extruders, used for various medium and large diameter plastic pipe rods Extrusion traction of materials.
It has the characteristics of large traction force, uniform traction force distribution, the pipe is not easily deformed, and the function of thickening the pipe wall. It is the most ideal traction method for plastic pipes. And also equipped with an automatic length meter to control the subsequent cutting.
Cutting machine
Suitable pipe:PPR,HDPE,diameter 400 mm
PVC pipe OD: 800mm
Applications:The basic design idea of MBBR is to be able to operate continuously, without clogging, without backwashing, with small head loss and large specific surface area. This can be achieved by growing biofilms on smaller support units that move freely with the water flow in the reactor. In aerobic reactors, the carrier is moved by aeration; in anoxic/anaerobic reactors, the carrier is moved by mechanical stirring. In order to prevent the loss of packing in the reactor, a porous filter can be installed at the outlet of the reactor (Figure 1). MBBR is generally a cuboid or cylindrical structure. The cuboid-shaped reactor is evenly divided into several grids or no grids along the length direction of the tank with a partition. Overall, the water flow in the reactor is in a plug flow state, and in each cell, the water flow is in a fully mixed state due to aeration fluidization. The tank is filled with polyethylene or polypropylene suspended fillers with specific gravity close to water and large specific surface area. The perforated aeration tube aerates on one side, so that the filler circulates in the pool. The bottom of the reactor with the cylindrical structure is provided with a microporous aeration head. In addition, some reactors are not only equipped with an aeration device at the bottom of the pool, but also a stirring device. These stirring devices allow the reactor to be easily and flexibly used in anoxic conditions. Sometimes in order to prevent the stripping effect and volatilization effect caused by aeration, a cover can be added above the reactor.Q1. How can I make the order? or How can i get the machines?
A. Please contact the supplier, then she will tell you how to make the order, usually tell her the requirements and she will give you a best price, then if you think the price is ok with high quality, then make the payment or pay the deposit, the supplier make the machines for you, about 30-45 days they will send the machines out, and about several days, you will get the machines, so the first and the important one is contact the supplier.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Address:
Yongli Industrial Park, Leyu Town, Zhangjiagang City Jiangsu Province, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Zhangjiagang kangju machinery is a manufacturer and supplier of plastic machines in China, specializing in plastic recycling line, plastic granulating line, plastic pipe production lines, plastic sheet ceiling line, plastic molds and plastic auxiliary machines.
According to customers′ different requirements, our technical team will offer complete solution from the beginning of the plastic material production to the end of finished plastic products production.
With rich manufacturing experience, continuous improvement and constant innovation, plastic machines of high quality and good price from WINSOAR have been exported to America, Bangladesh, Philippines, Egypt, Russia and other countries and regions. We know the importance of quality and price and have been always supporting customers on quality and price during these years.
With special team for before-sale service and after-sale service. Winsoar has been continuously offering solving solutions of technical problems to customers all the time. We also have 24-hour online service system which can help customers at any time.